The new MELO 2 atomizer tank is remarkably convenient to use and When used with EC TC-Ni/EC TC-Ti head, the MELO 2 atomizer can be compatible with various temperature control devices, especially the iStick TC60W.
Mainly featuring: Optional types of EC heads–EC head and EC TC head, separately supports normal VW (Variable Wattage) device and smart TC (Temperature Control) device. The side e-liquid fill hole is designed for ease of refilling e-liquid. It comes with large liquid capacity of 4.5ml, reducing the frequency of refilling e-liquid. The amount of airflow can easily be adjusted by rotating the flexible airflow control ring on the atomizer base so as to get different vaping experiences.
The metal mouthpiece packs with excellent characteristic of heat insulation. All the EC series atomizer heads are applied with 100% pure cotton wick. The e-liquid fill hole is located in the side of the top cap of atomizer tube. Rotate counterclockwise the regulation ring on the top cap to open the e-liquid fill hole. Then slowly refill e-liquid into the glass tube. Finally close the e-liquid
fill hole by rotating clockwise the regulation ring.
You can replace the atomizer head by First pull the atomizer base out of the MELO 2 atomizer, Then screw off the atomizer head from the atomizer base and Finally screw a new atomizer head tightly onto the atomizer base.
Have a full life enjoyment as you make use of this new melo 2 from eleaf company.
Eleaf Melo 2 comes with
1× MELO 2 Mouthpiece
1× MELO 2 Atomizer Tube
1× EC Atomizer Head 0.5ohm
1× EC TC-Ni head 0.15ohm
1× EC TC-Ti head 0.5ohm
1× MELO Atomizer Base
4× Silicone ring( 2 red, 2 blue)