GODOX Mini Pioneer 200 Studio Flash
With a standard interface good commonality, can match the softbox, block light, near the reflective umbrella, etc
Use high temperature resistant flame retardant engineering plastics, good safety
Promise that move light, stable performance
Output power: 200W
Input voltage: 100V—130V/60Hz
Recycle time: 0.5-3 sec.
Modeling lamp: 75W
Output control: step less 1/8-full
Flash duration (sec.):1/2000-1/800
Flash triggering method: Sync cord, Slave, Test button, Flash trigger
Color temperature: 5600K±200K
New weight: Approx 870g
The transmitter is to be attached on the hot shoe of the camera while the receiver is to be plugged into the studio flash. The transmitter emits radio signal to the receiver when shutter is pressed. The receiver, once picks up the signal, will trigger off the external flash unit. Sync speed is 1/200s.This flash trigger unit has strong anti-interference function and has up to 4 channels for you to choose. It is extremely useful if there are severa photographers working nearby.
The transmitter has super low power consumption, no any damage to camera.
It comes with a 3.5mm sync cable which permits the transmitter still works even the camera has not hot shoe mount.
Please set the transmitter and receiver at the same channel.
It is not compatible with PT-04 TM.
Channel: 16 Channel
Receiver power: AC 100-240V 50/60Hz
Transmitter power: 12V 23A
Sync output socket: 6.35mm & 3.5mm
Work distance indoor:15-35m
Work distance outdoor:approx. 15m
Sync speed: 1/200s
A soft box is an essential piece of kit for the photographic studio utilising continuous or flash lighting, creating even, natural, diffused light distribution and eliminating extreme highlights and hotspots
2 x Godox 200W Studio Flash Light
2 x Modeling Lamp
2 x Power Cord
2 x Light Stand (Max: 195cm Height)
2 x 50 x 70cm (Soft Box)
1 x AT-16 Flash trigger set